上海航欧机电设备有限公司 > 产品分类 > 传动与控制 > Placid Industries
PLACID

Placid Industries

Placid Industries工厂授权上海航欧机电设备有限公司中国区代理(Non-exclusive)

http://www.placidindustries.com/sales.html

Placid Industries工厂授权上海航欧机电设备有限公司中国区代理(Non-exclusive)

Placid Industries工厂授权上海航欧机电设备有限公司中国区代理(Non-exclusive)

 

 

PLACID传动控制器 磁粉制动器/离合器:PLACID普莱西德工业公司1973年-成立 , 1981年-制造磁粉离合器和制动器,1990年在欧洲销售通过HucoD ,1994年-制造磁滞制动器,2003年销售大磁粉制动器(千字节)和离合器(架 KC)

 

中山市先声达机电设备有限公司PLACID产品特征:由于没有电激励,自由的轴旋转。 随着电子激发,成为轴耦合的情况。 虽然负载转矩小于输出扭矩,轴不会旋转。 当负载转矩的增加,制动将下滑顺着水平的转矩所规定的线圈输入电流。

 

PLACID公司主要产品:传动控制器,PLACID磁粉离合器PLACID传动控制器,PLACID磁粉制动器, PLACID磁粉离合器, PLACID磁滞制动器, PLACID储存自订离合器和制动器, PLACID

主要型号:

  0.003 – 0.063 1.5 11 x 10-9 1.5 0.7 4000 0.2
  0.006 – 0.31 16 x 10-8 2 3500
  0.04 – 1 2 11 x 10-7 3.5 4 3000 0.6
  0.05 – 2.5 3 55 x 10-7 8 5 2500 1
  0.2 – 6 4 23 x 10-6 15 25 2000 2
  0.3 – 15 6 34 x 10-6 20 2.5
  0.6 – 35 9 12 x 10-5 30 50 1800 4
  1 – 60 8 45 x 10-5 50 100 7
  2.5 – 115 13 61 x 10-5 55 120 8
  3 – 150 15 x 10-4 80 1300 12
  4 – 220 18 29 x 10-4 110 1000 21
B5Z
B5ZD
    
B1     
B2          
B6          
B15               
B35                 
B60     
B115          
B150          
B220            
MODEL

(Click p/n
to view
photo)

Shaft
Style
 Torque
Range

(lb.-ft.)

 
Maximum
Overhung
Load

(lbs.)

Weight

(lbs.)

Data Sheets

 

 Drawings

  Optional
Electric
Fan
Cooling
Input
Current

(amps)
  Solid 0.2 – 15 1.3 90 1800 19
  0.5 – 38 2 125 31
  0.5 – 70 2.4 175 79
  2 – 130 2.7 200 128
   4 – 300 3.5 325 225
  Hollow 1.4 – 30 1.25 125 500 17
  1.5 – 70 2 175 31
  4 – 140 2.4 200 62
MODEL Heat Dissipation  (Watts) Compressed Air
at
100 RPM 
 * at
1000 RPM 
with external cooling by:  Pressure 
(lb.-in.2)
Flow Rate
(ft.3 / minute)
 Compressed
Air 
Optional
Electric Fan 
 KB-2.5 130 175 260 4 6
 KB-5 190 275 425 5 7
 POB-100F  300 500 800 9 10
 POB-200F  425 800 1200 7 6
 POB-400F  550 1200 1900 21 14
 PLB-50 160, all RPM 240 7 7
 PLB-100 200, all RPM 300 8
 PLB-200 350, all RPM 500 9
MODEL

Click p/n
to view
photo

Torque
Range

(lb.-in.)

Input
Electric
Power

(Watts)

(Watts)

Maximum
Overhung
Load 

(lbs.)

 Weight

(lbs.)

Data Sheets

 

Drawings
   0.01 – 0.31 3 2 4 2000 0.7    
  0.06 – 2 6
  0.19 – 5 5 10 20 3
    0.4 – 14 5 20 35 1400 3.5    
  0.4 – 15 6 5
  1 – 35 10 30 50 1000 9
  1.3 – 70 14 50 80 17
  4 – 130 15 80 22    
MODEL

(Click p/n
to view
photo)

Shaft
Style
 Torque
Range

(lb.-ft.)

 
 Max.
Over-
hung
Load

(lbs.)

Weight

(lbs.)

Data Sheets

 

  Drawings

Input
Current

(amps)
  solid 0.2 – 15 1.3 90  1800 21
  0.5 – 38 2 125 35
  0.5 – 70 2.4 175 87
  2 – 130 2.7 200 147
  4 – 300 3.5 325 259
  hollow 1 – 30 1.3 125 1000 26
   1 – 65 2.2 175 46
MODEL Heat Dissipation
(watts)
Compressed Air
at
100 RPM
at
1000 RPM
with compressed
air cooling
Pressure
(lb.-in.2)
Flow Rate
(ft.3 / minute)
KC-2.5 130 175 260 4 6
KC-5 190 275 425 5 7
POC-100F 300 500 800 9 5
POC-200F 425 800 1200 7 6
POC-400F 550 1200 1900 21 14
PHC-50 250 400
PHC-100 400 800
Machine: Wire EDM (Electric Discharge Machining) machine
Manufacturer: Vollmer

  • Placid part number: B7-24-1ME
  • OEM part number: unknown
  • Coil: 24 volts, Resistance: 134 ohms
  • Case O.D. = 2.00 “, 51 mm

Application – Control tension in wire that cuts metal.

 

Machine: Wire EDM (Electric Discharge Machining) machine
Manufacturer: Charmilles

  • Placid part number: B10-18
  • OEM part number: 434234.
    Replaces 433833 with no modifications.
  • For machines: FI290, FI300, FI500
  • Coil: 18 volts, Resistance: 38 ohms
  • Case O.D. = 2.36 “, 60 mm

Application – Control tension in wire that cuts metal.

 

Machine: Photographic film developer
Manufacturer: Kodak

  • Placid part number: B35-EK
  • Replaces: Qualex 2B4473,  Electroid 50-EPB30-11-08S-24
  • Coil: 24 volts, Resistance: 50 ohms
  • Case O.D. = 3.375″

Application – Tensions roll of film

 

Machine: Microfiche (microfilm) duplicator
Manufacturer: Photomatrix (product line now owned by Scan-Optics)
Was sold as a Kodak machine.

  • Placid part number: B35-12-PH
  • OEM part number: Photomatrix 102363
  • Coil: 12 volts, Resistance: 18 ohms
  • Case O.D. = 3.375″

Application – Tensions roll of film

 

Machine: Digital Printing Press, Quickmaster Di
Manufacturer: Heidelberg

  • Placid part number: B60-HEID
  • OEM part number: A4.114.1420
  • Coil: 12 volts, Resistance: 18 ohms
  • Case O.D. = 4.5 “

Application – Tensions plate material.

 

Machine: Textile processing machine
Manufacturer: Young Engineering

  • Placid part number: B60-YE-1
  • OEM part number: 26010101
  • Coil: 90 volts, Resistance: 547 ohms
  • Case O.D. = 4.5 “
  • 2 brakes per machine

Application – Provides drag torque on 1/2 of a roller to maintain web straightness.

 

Machine: Pipe bending machine
Manufacturer: Eaton Leonard

  • Placid part number: B115-EL
  • OEM part number: 800469 H, Carriage Brake
  • Coil: 24 volts, Resistance: 36 ohms
  • Case O.D. = 4.5 “
  • 2 to 4 brakes per machine

Application – Holds chain connected to carriage & verticle axis stationary while pipe is being bent.

 

Machine: Beverage container labeling machine
Manufacturer: Trine

  • Placid part number: B150-CMS
  • OEM part number: 4516
  • OEM machine: 4500
  • Coil: 24 volts, Resistance: 55 ohms
  • Case O.D. = 5.2 “

Application – Tensions roll of labels, to be put on soda bottles, etc.

Machine: Bagger
Manufacturer: Rennco

  • Placid part number: C25-24-W2
  • OEM part number: Unknown
  • Coil: 24 volts, Resistance: 43 ohms
  • Case O.D. = 2-7/8 “
  • Must be mounted with shafts horizontal.

Application – Winds edge of plastic web. Powered by 

 

Machine: Digital Printing Press
Manufacturer: Ryobi
中山市先声达机电设备有限公司 Also sold under Xerox name.

  • Placid part number: C100-PRST1
  • Ryobi part number: 95325004
  • Presstek part numbers: 535454528,
    535454528-1, 535454528-2, 535454528-3
  • Replaces Ogura clutch, part number: OPC 100-01
  • OEM machines: Ryobi 3404-DI  &
    Xerox Docu-Color 233-DI
  • Coil: 12 volts, Resistance: 11 ohms
  • Case O.D. = 4.5 “

Application – Feeding plate material in digital printing press.

 

Machine: Rewinder
Manufacturer: CTC International, (formerly Compensating Tension Control)

  • Placid part number: C130-90-CTC
  • OEM part number: B31159
  • Coil: 90 volts, Resistance: 633 ohms
  • Case O.D. = 5.20 “

Application – Controls tension on roll. Hollow through-shaft for compressed air, to actuate chuck.

 

Machine: Digital Printing Press
Manufacturer:中山市先声达机电设备有限公司 Adast (Adamovske Strojirny)

  • Placid part number: C100-ADAST
  • OEM machine: Adast 557
  • Coil: 12 volts, Resistance: 11 ohms
  • Case O.D. = 4.5 “

Application – Feeding plate material in digital printing press.

Machine: 35mm Photographic Film Splicer
Manufacturer: Gretag

  • Placid part number: 15CC2-24-1F
  • OEM part number: 50-350706-001
  • Coil: 24 volts, Resistance: 205 ohms
  • Case O.D. = 1.437 “

Application – Apply torque to 35mm film bobbin, to determine the direction the film is wound inside the can.

 

Machine: Daytona USA car racing game
Manufacturer: Sega

  • Placid part number: C-Daytona
  • Part number: Sega 601-7489
  • Coil: 24 volts, Resistance: 31.3 ohms
  • Case O.D. = 3-5/8 “

Application – Connects to the steering wheel.

 

Machine: Docu-Mate II, Microfilm Machine
Manufacturer: Terminal Data Corp. (TDC)

  • Placid part number: CC30P-10-1
  • OEM part number: 212023
  • Coil: 10 volts, Resistance: 5 ohms
  • Case O.D. = 3-3/4 “
  • 2 clutches per machine
  • 1 brake per machine, Placid Ind. p/n B25P-10-1, TDC p/n 212022, not shown

Application – Engages motor to belt that transports original paper document.

 

Machine: Turret-style rewinder
Manufacturer: CTC International, (formerly Compensating Tension Control)

  • Placid part number: CC60P-CTC
  • OEM part number: P1068-19
  • Coil: 90 volts, Resistance: 540 ohms
  • Case O.D. = 3.50 “
  • 5 clutches per machine
  • Special low torque version, CC60-CTC-B, for small rolls & light tension, also available.

Application – Machine winds web onto smaller rolls. The clutch drives the small roll, controlling tension.

Left: Clutch CC60-CTC-B
Special low torque, high RPM version
Rated torque = 30 lb.-in.

Right: Clutch CC60P-90-CTC
Standard version
Rated torque = 60 lb.-in.

Left:

  • Placid name: Rotor
  • Placid part number: R15P-2
  • Accraply part number: 060502
  • Replaces Ogura OPC-15
  • Case O.D. = 1-5/8 “
Right:

  • Placid name: Stator
  • Placid part number: S15-10
  • Accraply part number: 09741
  • Replaces Ogura OPC-15-01
  • Coil Resistance: 8.4 ohms
  • Case O.D. = 4 “

 

Rotor & Stator (shown assembled)
Rotor:

  • Placid part number: R30
  • Torque = 30 lb.-inches
  • Case O.D. = 2.149″

Stator:

  • Placid part number: S30
  • Voltage: 6, 12, 24 or 90 D.C.
  • Case O.D. = 4″
MODEL

(Click p/n
to view
photo)

Torque
Range

(oz.-in.)

Input
Electric
Power

(watts)
Shaft Inertia

(lb.-in.-sec.2)


(watts)
Overhung
Load, Max.

(lbs.)

Weight

(lbs.)

Data Sheets
 
Cover On Cover Off
      0.04 – 2.5 2.5  3.8 x 10-6 5 1 10,000 0.23
     0.3 – 11 2  36 x 10-6 9 15 4 9000 0.7
     0.6 – 35 6  92 x 10-6 15 25 5 8000 2   
       3 – 85 5  560 x 10-6 35 60 40 6000 4.5   
       4 – 140 7  970 x 10-6 45 75 40 5000 6   
       6 – 250 7  290 x 10-5 65 110 50 5000 9
MODEL   DRAWINGS
     
 H3            
 H11            
 H35            
 H85            
 H140            
 H250            
PS   24 Volt, 0.75 Amp  &  12 Volt, 1.25 Amp versions
For all our small brakes & clutches

 

  • Easy to use – The Span adjustment scales output current for small or larger brakes & clutches.

Control Output Current via –

  • Knob (Potentiometer)
  • 0-10 Volt Signal – from computer or PLC
  • Follower Arm Potentiometer  
  • Ultrasonic Sensor  .

The Placid Ind.  arm or  connects to the supply for constant tension unwinding / rewinding applications.

 

 

 
PST   24 Volts,  2, 3, 4 Amp versions
For large brakes & clutches or multilple smaller ones.

Control Output Current via –

  • Knob (Potentiometer)
  • 0-5 volt,  0-10 volt  or  4-20mA DC Signal

 

 

 
PSH   30 Volts,  2, 3, 5 Amp versions
For large brakes & clutches or multilple smaller ones.

Control Output Current or Output Voltage via –中山市先声达机电设备有限公司  Knob (Potentiometer)

MODEL  
F-12-6
(Aluminum Case)
FM-4-2
(Miniature)
 
Resistance 500 ohm  
Electrical Angle 65 degrees  
Mechanical Angle 360 degrees  (No stops)  
Drag Torque 4 oz.-in. 1 oz.-in.  
Overhung Load 20 lbs. 2 lbs.  
Download set-up
instructions
 

Ultrasonic Sensor U-B Specifications

Power Input . . . . .  15-30 VDC, 35 milliamps max.
Powered by Placid Ind. power supply.
Range . . . . . . . .  3.9 – 39.3 inches (100-1000 mm)
Output  . . . . . . .  0 to 10 volts D.C., 20 mAmps max.
Push button adjustable endpoints
Resolution  . . . . .  0.012 inches (<0.3 mm)
Repeatability . . . .  0.02 inches (<0.5 mm)
Temperature . . . . .  14 to 140°F (-10 to +60°C)
Protection class  . .  IP67 (Sealed plastic case)
 
FOR BRAKE
OR CLUTCH
MODEL
CUSTOMER SHAFT FLEXIBLE COUPLING DIMENSIONS
Diameter Type Part Number Diameter Length Shaft Gap Type
min. max.
B5Z 3/16 clamp J16-3-2 0.63 0.80 0.02 0.40 Beam
B1, C2 J19-3-3 0.75 0.90
B2 1/4 J22-4-4 0.88 1.06 0.46
C5 5/16 J25-5-5 1.00 1.25 0.65
B6 3/8 J28-6-6 1.13 1.50 0.91
B15, C15 3/8 2 flats at
90 degrees
J33-F37-F37 1.31 1.89 0.71 0.78 Oldham
B35, C35 1/2 J41-F50-F50 1.63 2.00 0.60 0.66
B60 3/4 3/16 keyway J50-C75-K75 1.97 2.35 0.72 0.79
2 flats at
90 degrees
J50-C75-F75
C70 3/4 3/16 keyway J50-K75-K75 1.97 2.35 0.72 0.79
2 flats at
90 degrees
J50-K75-F75
B115, B150
B220,C130
3/4 3/16 keyway J57-K75-K75 2.25 3.07 0.83 0.91
7/8 J57-K75-K87
KB & POB (large brakes) &
KC & POC (large clutches)
Model Rated Torque Drawings  Photographs

中山市先声达机电设备有限公司Data Sheets

 

Solid Shaft Hollow Shaft
1 Side 2 Sides
B5ZD 1  oz.-in. Not
Available
B5Z 5  oz.-in.
B1 16  oz.-in.
B2 40  oz.-in.
B6 6  lb.-in.
B15 15  lb.-in.
B35 35  lb.-in.
B60 60  lb.-in.
Not
Available
B115 115  lb.-in.
B150 150  lb.-in.
B220 220  lb.-in.
KB-2.5 15  lb.-ft. Not Available
KB-5 38  lb.-ft.
POB-100F  70  lb.-ft.   
POB-200F 130  lb.-ft.
POB-400F 300  lb.-ft.
PLB-50 30  lb.-ft. Not Available
PLB-100 70  lb.-ft.
PLB-200 140  lb.-ft.

 

 

Magnetic Particle Clutches
Model Rated Torque Drawings
Photographs
Data Sheets
 
C2 2  lb.-in.
C5 5 lb.-in.
CC14 14 lb.-in.
C15 15 lb.-in.
C35 35 lb.-in.
C70 70 lb.-in.
C130 130 lb.-in.
KC-2.5 15  lb.-ft.
PHC-50 30  lb.-ft.
KC-5 38  lb.-ft.
PHC-100 65  lb.-ft.
POC-100F 75  lb.-ft.
POC-200F 130  lb.-ft.
POC-400F 300  lb.-ft.
Hysteresis Brakes
Model Rated
Torque

(oz.-in.)

Drawings  Photographs

Data Sheets

 

 
Solid Shaft  
1 Side 2 Sides 1 Side  
H3 2.6  
H11 11  
H35 35  
H85 85  
H140 140  
H250 250  

Models H11 thru H250 have the Placid Industries  which keeps slip torque smooth.
 

Power Supplies
Model Style Drawings
Photographs
Instructions
 
PS Open
PS-M Open,
with ammeter
PS-MC Enclosed
PST Enclosed,
aluminum case
PSH Enclosed,
bench-top

 

 


中山市东升镇裕脆水产贸易商行 佛山市顺德区伦教诚锐玻璃机械厂 长春衡纬光电有限公司 黄冈市文物局 邯郸市梵创贸易有限公司 大通八运驾驶员培训学校 西宁汽车摩托车驾驶员培训学校 厦门起翔进出口有限公司 深圳市环旅天下国际旅行社有限公司 佛山市南海中信友兴模具有限公司 珠海市勇昊电子有限公司 酷视网络软件 上海瑞狐广告有限公司 北京黾勉斋工艺品商行 新都区南光康跃真空设备厂 滕州市官桥镇人民政府 珠海市和平拍卖有限公司 河北巨波科技有限公司 汇邦环保科技 直前号 上海福润家具有限公司 太原景腾达 佛山市南海区和顺大保发布厂 营口港物流网 青羊区向泰华技能培训服务部 郑州信德邦牧业科技有限公司 沈阳招聘 佛山计免之窗 深圳市中科智慧科技有限公司 江西禧圆动漫有限公司 广东唯杰律师事务所 深圳市龙腾高科电子有限公司 重庆澳达科技有限公司 广安市鼎鑫金属科技有限公司 北戴河区会永农家院旅馆 喜马拉雅FM 杭州兴马房地产营销策划有限公司 广州海外有限公司 中山市小榄镇康运制衣厂 万博设计 ppnba直播吧飞飞CMS官网论道网洋创支付吧